Dr. Priya Tyagi | Sustainable Engineering | Best Researcher Award

Published on by Superior Awards

Dr. Priya Tyagi | Sustainable Engineering | Best Researcher Award

Dr. Priya Tyagi | Sharda University | India

Dr. Priya Tyagi is a dedicated sustainable architect with extensive academic and professional expertise in sustainable design and rural housing development. She earned her Doctor of Philosophy from Malaviya National Institute of Technology, Jaipur, focusing on a decision-making framework for design quality assessment of rural houses in India, following her Master of Architecture in Sustainable Architecture from Deenbandhu Chhotu Ram University of Science and Technology, Murthal, and Bachelor of Architecture from Shri Ram Group of Colleges, Lucknow. She has actively contributed to research and practice in architecture, including a joint research project on municipal waste management at Massachusetts Institute of Technology, Boston, and holds professional credentials as a Green Rating for Integrated Habitat Assessment certified professional. Currently, she serves as Assistant Professor at Sharda School of Design, Architecture and Planning, Greater Noida, having previously held academic positions at Sanskar College of Architecture and Planning and practical experience with Shelter Architects and M/s Raj Architects and Builders. Dr. Tyagi has been recognized for her expertise through appointments as a reviewer for Scopus-indexed journals, including the Journal of Infrastructure, Policy and Development, and the Journal of Civil, Construction and Environmental Engineering. Her research output includes 9 documents with 6 citations and an h-index of 2, reflecting her growing impact in sustainable architecture, design quality assessment, and environmentally responsible building practices in India.

Profile: Scopus | Google Scholar | Orcid

Featured Publications

Tyagi, P., Shrivastava, B., & Kumar, N. (2024). Investigating rural housing quality indicators in the Indian scenario for inclusive imageability. Environment, Development and Sustainability, 26(10), 25609-25643.

Tyagi, P., Shrivastava, B., & Kumar, N. (2023). Towards creating inclusive villages: The types of rural settlements in India. ISVS e-Journal, 10(2), 91-106.

Bhyan, P., Tyagi, P., Doddamani, S., Kumar, N., & Shrivastava, B. (2023). Life cycle assessment of lightweight and sustainable materials. Lightweight and Sustainable Composite Materials, 117-142.

Tyagi, P., Shrivastava, B., & Kumar, N. (2024). A comprehensive investigation of rural and low-rise housing design quality: A thematic and bibliometric analysis. Journal of Housing and the Built Environment, 39(3), 1323-1353.

Tyagi, P., Shrivastava, B., & Kumar, N. (2025). Optimizing rural housing design quality: Indicators and parameters for comprehensive assessment. Environment, Development and Sustainability, 1-43.

Mr. Ahmad Usman | Sustainable Engineering | Best Researcher Award

Published on by Superior Awards

Mr. Ahmad Usman | Sustainable Engineering | Best Researcher Award

Mr. Ahmad Usman | Cranfield University | United Kingdom

Mr. Ahmad Usman is a dedicated PhD student at Cranfield University specializing in coating and corrosion science, with a strong focus on developing advanced materials to protect critical components in power plants under demanding conditions. His research encompasses the fireside-corrosion behavior of thermally sprayed and Ni-based coatings in challenging environments, including chlorine-rich combustion atmospheres, and investigates oxidation, erosion, and wear mechanisms at the microscopic level. Mr. Usman has contributed to advancing knowledge on thermal spray coatings through both academic and industry projects, including his role as Group Innovation Engineer at Welding Alloys Group, UK, and collaborations with the National High Temperature Surface Engineering Centre. He has co-authored book chapters on self-healing elastomers and polymeric paints and coatings, highlighting his expertise in functional polymers. His research interests include real-time monitoring of coating degradation, modeling corrosion kinetics in waste-to-energy (WtE) environments, and optimizing thermal spray coatings to resist high-temperature corrosion, erosion, and wear damage. With a growing citation record and an h-index of 2, Mr. Usman is an active member of the Institute of Corrosion and the Pakistan Engineering Council, demonstrating his commitment to both academic excellence and industrial innovation, while consistently exploring innovative solutions to extend the lifespan and reliability of critical energy infrastructure.

Profile: Orcid

Featured Publications

Usman, A., Syed, A., Isern Arrom, L., Nicholls, J., & Cordero, M. (2024, September 5). Degradation of novel coating systems for heat exchanger materials for WtE power plant applications [Conference poster]. EUROCORR 2024, Cranfield University.

Rehan, Z. A., & Usman, A. (2023). Polymeric paints and coatings. In Advanced Functional Polymers. Springer.

Zubair, Z., Usman, A., & Hafeez, A. (2023). Self-healing elastomers. In Advanced Functional Polymers. Springer.

Usman, A. (2021, December 8). Fabrication of low emissivity paint thermal/NIR radiation insulation for domestic applications [Conference poster]. 1st International Conference of Polymers and Composites (ICPC-2021).

Usman, A., Isern Arrom, L., Nicholls, J., Cordero, M., & Syed, A. U. (2025). Fireside corrosion behavior of thermally sprayed coatings for waste-to-energy power plant applications. Journal of Materials Engineering and Performance.

Prof. Ilknur Zeren Cetin | Sustainable Engineering | Best Researcher Award

Published on by Superior Awards

Prof. Ilknur Zeren Cetin | Sustainable Engineering | Best Researcher Award

Prof. Ilknur Zeren Cetin | Ondokuz Mayis University | Turkey

Prof. Ilknur Zeren Cetin is an Assistant Professor in the Department of Urban and Regional Planning at Ondokuz Mayis University, Faculty of Architecture, Turkey. She has a strong academic and research background in urban sustainability, climate change impacts, land cover dynamics, and spatial planning, with her work focusing on integrating environmental monitoring and urban design to promote resilient and sustainable urban environments. She has contributed significantly to high-impact research, with publications in SCI, SSCI, and AHCI-indexed journals, including studies on climate change impacts in the Upper Sakarya Basin, large-scale monitoring of riparian land-cover changes, and the conservation of Taxus baccata. Her research also addresses practical urban challenges, such as assessing walkability for parents with strollers and providing recommendations for sustainable urban design, reflecting her interdisciplinary approach that bridges environmental science, urban planning, and social considerations. With 1,617 citations by 816 documents, 28 publications, and an h-index of 21, Prof. Cetin demonstrates a consistent record of scholarly influence and contribution to the field, and her work continues to guide evidence-based urban policy and planning strategies in Turkey and beyond, emphasizing sustainable development, climate adaptation, and community-centered urban design.

Profile: Scopus | Google Scholar | Orcid

Featured Publications

  • Cetin, M., Zeren, I., Sevik, H., Cakir, C., & Akpinar, H. (2018). A study on the determination of the natural park’s sustainable tourism potential. Environmental Monitoring and Assessment, 190(3), 167.

  • Sevik, H., Cetin, M., Ozel, H. B., Ozel, S., & Zeren Cetin, I. (2020). Changes in heavy metal accumulation in some edible landscape plants depending on traffic density. Environmental Monitoring and Assessment, 192(2), 78.

  • Cesur, A., Zeren Cetin, I., Cetin, M., Sevik, H., & Ozel, H. B. (2022). The use of Cupressus arizonica as a biomonitor of Li, Fe, and Cr pollution in Kastamonu. Water, Air, & Soil Pollution, 233(6), 193.

  • Cetin, M., Aljama, A. M. O., Alrabiti, O. B. M., Adiguzel, F., Sevik, H., & Zeren Cetin, I. (2022). Using topsoil analysis to determine and map changes in Ni and Co pollution. Water, Air, & Soil Pollution, 233(8), 293.

  • Cetin, M., Aljama, A. M. O., Alrabiti, O. B. M., Adiguzel, F., Sevik, H., & Zeren Cetin, I. (2022). Determination and mapping of regional change of Pb and Cr pollution in Ankara city center. Water, Air, & Soil Pollution, 233(5), 163.

  • Varol, T., Cetin, M., Ozel, H. B., Sevik, H., & Zeren Cetin, I. (2022). The effects of climate change scenarios on Carpinus betulus and Carpinus orientalis in Europe. Water, Air, & Soil Pollution, 233(2), 45.

  • Cesur, A., Zeren Cetin, I., Abo Aisha, A. E. S., Alrabiti, O. B. M., Aljama, A. M. O., et al. (2021). The usability of Cupressus arizonica annual rings in monitoring the changes in heavy metal concentration in air. Environmental Science and Pollution Research, 28(27), 35642–35648.

 

Dr. Goutam Khankari | Sustainable Engineering | Best Researcher Award

Published on by Superior Awards

Dr. Goutam Khankari | Sustainable Engineering | Best Researcher Award

Dr. Goutam Khankari | Damodar Valley Corporation | India

Dr. Goutam Khankari is a distinguished researcher and engineer specializing in thermal power systems. His PhD research, titled “Thermodynamic Analysis and Performance Improvement of Coal-Fired Thermal Power Plants,” focused on a comprehensive 4-E approach—Energy, Exergy, Environment, and Economic analysis—of various coal-fired steam power plants using high-ash Indian coals. The primary objective of his work was to enhance the overall efficiency and net power output of these plants by exploiting low-grade waste energy through the Kalina Cycle System, integrating solar energy, and optimizing operational conditions. Dr. Khankari’s research not only provides critical insights into energy and exergy efficiencies but also emphasizes sustainable practices and environmental considerations in coal-based power generation. His work has been widely recognized, reflected in 97 citations across 88 documents and an h-index of 5, demonstrating significant academic influence. Through his innovative approaches to performance improvement and waste energy utilization, Dr. Khankari has contributed meaningfully to the field of thermal engineering, offering practical solutions for maximizing energy output while minimizing environmental impact in India’s coal-fired power sector.

Profile: Scopus | Google Scholar

Featured  Publications

Khankari, G., & Karmakar, S. (2016). Power generation from coal mill rejection using Kalina cycle. Journal of Energy Resources Technology, 138(5), 052004.

Khankari, G., Munda, J., & Karmakar, S. (2016). Power generation from condenser waste heat in coal-fired thermal power plant using Kalina cycle. Energy Procedia, 90, 613–624.

Khankari, G., & Karmakar, S. (2018). Power generation from fluegas waste heat in a 500 MWe subcritical coal-fired thermal power plant using solar assisted Kalina Cycle System 11. Applied Thermal Engineering, 138, 235–245.

Khankari, G., & Karmakar, S. (2021). A novel solar assisted Kalina cycle system for waste heat utilization in thermal power plants. International Journal of Energy Research, 45(12), 17146–17158.

Roge, N. H., Khankari, G., & Karmakar, S. (2022). Waste heat recovery from fly ash of 210 MW coal fired power plant using organic rankine cycle. Journal of Energy Resources Technology, 144(8), 082107.

Khankari, G., & Karmakar, S. (2014). Operational optimization of turbo-generator (TG) cycle of a 500MW coal-fired thermal power plant. In 2014 6th IEEE Power India International Conference (PIICON) (pp. 1–6).

Khankari, G., Karmakar, S., Pramanick, A., & Biswas, M. (2013). Thermodynamic analysis of a 500MW coal-fired Indian power plant. In ESMOC Conference, NIT Durgapur, India.

Dr. Iman Soltani | Green Technologies | Best Researcher Award

Published on by Superior Awards

Dr. Iman Soltani | Green Technologies | Best Researcher Award

Dr. Iman Soltani | Imam Khomeini International University | Iran

Dr. Iman Soltani is a distinguished researcher in Electrical Engineering with expertise in renewable energy, power electronics, and electric vehicle technologies. He holds a doctorate in Power Engineering from Malek Ashtar University of Technology, preceded by a master’s degree from Imam Khomeini International University and a bachelor’s degree in Robotic Engineering from Shahrood University of Technology. His research encompasses energy management, storage systems, electrical machines, and advanced control algorithms. With a focus on battery charging systems and the optimization of power inductors, Dr. Soltani combines academic excellence with practical innovation, driving forward advancements in sustainable and efficient energy solutions.

Professional Profile

Google Scholar | Scopus

Education and Experience

Dr. Soltani earned his doctorate in Electrical Engineering with a focus on the analysis and optimization of variable power inductors in radio frequency applications. His master’s research explored intelligent methods for maximum power point tracking in solar arrays under diverse conditions. His bachelor’s work centered on designing and controlling multi-degree-of-freedom robotic systems. Throughout his academic journey, he has developed strong expertise in renewable energy, energy storage, control systems, and power electronics. His professional experience integrates theoretical research with hands-on engineering applications, enabling him to contribute innovative and impactful solutions to modern energy and automation challenges.

Summary Suitability

Dr. Iman Soltani stands out as an exceptional candidate for the Best Researcher Award in the field of Electrical Engineering, with specialized expertise in renewable energy systems, power electronics, and advanced control methodologies. His academic journey spans a doctorate in Power Engineering, a master’s degree in the same discipline, and a bachelor’s in Robotic Engineering, each marked by exceptional academic performance and impactful research.

Professional Development

Dr. Soltani has advanced his professional capabilities through extensive research, collaborative projects, and continuous engagement with emerging technologies. His expertise includes renewable energy integration, electric mobility solutions, and intelligent control systems. He has worked extensively on energy storage technologies, advanced battery charging methods, and energy management strategies. His professional growth is marked by interdisciplinary collaboration, knowledge exchange, and the application of innovative engineering principles to real-world problems. Dedicated to staying at the forefront of technological advancements, he continually enhances his skills, ensuring his contributions align with the evolving needs of sustainable power systems and advanced electrical engineering solutions.

Research Focus

Dr. Soltani’s research focus lies in the area of electrical power and renewable energy systems, closely linked with power electronics and advanced control. He investigates the integration of renewable sources into the power grid, efficient storage systems, and smart charging technologies for electric vehicles. His work includes developing algorithms for energy optimization, improving battery performance, and enhancing the efficiency of electrical machines and drives. Additionally, he explores the behavior and optimization of power inductors in high-frequency applications. His research bridges the gap between theory and application, contributing to the creation of sustainable, reliable, and efficient modern energy systems.

Awards and Honors

Dr. Soltani has been recognized for his exceptional academic performance and innovative research contributions. His work has earned commendations from academic institutions for its originality, technical depth, and practical value in the field of renewable energy and power engineering. He has consistently maintained a record of excellence throughout his educational and professional journey, demonstrating leadership in research and a commitment to advancing sustainable technologies. His achievements reflect both intellectual rigor and a dedication to developing solutions that address the pressing challenges in energy systems and electrical engineering.

Publication Top Notes

Title: An intelligent, fast and robust maximum power point tracking for proton exchange membrane fuel cell
Year: 2013
Citation: 30

Title: A detailed comparison between FOC and DTC methods of a permanent magnet synchronous motor drive
Year: 2015
Citation: 28

Title: Optimal placement of STATCOM to voltage stability improvement and reduce power losses by using QPSO algorithm
Year: 2013
Citation: 26

Title: Eagle strategy based maximum power point tracker for fuel cell system
Year: 2015
Citation: 19

Title: Various types of particle swarm optimization-based methods for harmonic reduction of cascade multilevel inverters for renewable energy sources
Year: 2013
Citation: 14

Title: A new sliding mode controller for DC/DC converters in photovoltaic systems
Year: 2013
Citation: 14

Title: Comparative of islanding detection passive methods for distributed generation application
Year: 2014
Citation: 11

Conclusion

With a proven record of high-impact publications, interdisciplinary innovation, and the ability to translate complex engineering concepts into practical solutions, Dr. Soltani exemplifies the qualities of a world-class researcher. His dedication to advancing clean energy technologies and his consistent scholarly excellence make him a highly deserving recipient of the Best Researcher Award.